Table of content
Trunnion ball valves and floating ball valves are two different types of ball valves. They look somewhat similar from the outside, but their internal structures are completely different. When choosing between them, you cannot only consider price, size or appearance.
The main difference between the two valves lies in how the ball is supported inside. For a floating ball valve, upstream and downstream pressure moves the internal ball to open or close the valve. In a trunnion ball valve, the internal ball is fixed.
To pick the right valve, you need to think about sealing performance, pressure, operating torque and the flowing medium.
What Is the Difference Between a Trunnion Ball Valve and a Floating Ball Valve?
The core difference is the support structure of the ball.
In a floating ball valve, the ball sits between seats and is not rigidly held by a bottom trunnion. Pressure moves the ball.
In a trunnion ball valve, the ball is supported at the top and bottom. Under pressure, the ball only rotates instead of shifting.
The table below shows more detailed comparisons.
| Comparison | Floating Ball Valve | Trunnion Ball Valve |
|---|---|---|
| Ball support | Ball can move slightly | Ball is mechanically supported |
| Basic sealing action | Ball moves toward downstream seat | Seats are energized toward supported ball |
| Pressure load | More load can be transferred to the seat | Support system helps manage ball load |
| Operating torque | May increase as pressure and size increase | Often better controlled under higher loads |
| Construction | Simpler | More complex |
| Typical use | Common where loads remain manageable | Common in larger or more demanding service |
| Relative cost | Generally lower in comparable conditions | Generally higher in comparable conditions |
Visually, floating ball valves are usually smaller while trunnion ball valves are larger.

What Is a Floating Ball Valve?
A floating ball valve is a type of ball valve. Its ball is mainly supported by valve seats and moved by fluid pressure.
Working principle: When the valve closes, upstream pressure pushes the ball against the downstream seat.
This valve has a simpler structure than the trunnion ball valve, so it is widely used in common pipeline systems.
But as pressure rises, the load on seats and operating torque will increase.
What Is the Purpose of the Trunnion in a Ball Valve?
The trunnion in a ball valve supports the ball.
It keeps the ball in place. The ball can rotate to open or close the valve. It stops pressure from fully pressing on the downstream seat.
So trunnion designs work better under high pressure or when high operating torque is needed.
How Does a Trunnion Ball Valve Work?
To open or close a trunnion ball valve, the ball rotates around the top stem and bottom trunnion support.
Its sealing does not depend on the ball moving downward. For some designs, pressure helps push the valve seats toward the ball.
How Do Their Sealing Mechanisms Differ?
Floating ball valve:
Turn the valve stem → upstream pressure acts on the ball → the ball moves → the ball presses against the downstream seat → sealing contact gets tighter.
Trunnion ball valve:
Turn the valve stem → the ball stays mechanically supported → seats push toward the ball → sealing contact remains.
This difference in sealing changes how force transfers through the valve.
Manufacturers can make both valves with different materials and seat designs per customer requests. Do not judge the valve type only by its name. Check its internal structure.
Which Valve Requires More Operating Torque?
A floating ball valve may need higher torque. Its torque rises when pressure increases.
Reason: Pressure pushes the ball onto the downstream seat, which increases contact force and friction.
A trunnion ball valve uses mechanical support for the ball. It handles different pressure levels. It is commonly used for demanding pipeline systems.
Many factors affect valve torque:
- Pressure differential
- Valve size
- Seat material
- Fluid properties
- Temperature
- Lubrication condition
- Stem and bearing design
- Manufacturing tolerance
You need to check these parameters before purchase.
Is a Trunnion Ball Valve Better for High Pressure?
Yes. Trunnion ball valves are preferred for high-pressure service.
Its support structure reduces the force of the ball pressing on the downstream seat. It lowers seat load and operating torque.
But high-pressure applications do not always require trunnion ball valves. Floating ball valves can still work within their rated pressure range.
Which Is Better for Larger Valve Sizes?
Trunnion ball valves gain more advantages as valve size increases.
Large-size trunnion ball valves have more reliable performance. They are widely used in large-diameter pipelines.
Which Is More Expensive: Trunnion or Floating Ball Valve?
For valves with the same size, pressure rating and material, trunnion ball valves cost more.
The higher price comes from its complex structure, including trunnion supports, bearings, seat assemblies and other internal parts.
Valve cost is affected by these factors:
- Body and trim materials
- Pressure requirements
- Seat design
- Actuation
- Testing
- Inspection
- Documentation
- Certification requirements
- Order quantity and delivery terms
What Are the Maintenance Differences?
The floating ball valve has a simpler structure and is easier to maintain.
The trunnion ball valve has extra supports, bearings and a more complex seat system. Its maintenance is harder.
Maintenance for both valves also depends on fluid type, operation frequency, contamination, temperature, seat material and working environment.
Trunnion Ball Valve vs Floating Ball Valve: Which One Should You Choose?
Consider these points when selecting:
- Valve size — required bore size and connection dimension
- Working pressure — normal and maximum operating pressure
- Pressure differential — pressure difference across the closed valve
- Temperature — operating temperature range
- Fluid properties — clean, corrosive, abrasive, viscous or dirty medium
- Operating torque — manual operation or actuator required
- Actuation type — manual, pneumatic, hydraulic or electric
- Seat performance — tightness and sealing requirements
- Maintenance plan — access to the valve after installation
- Project requirements — applicable tests, inspections, documents and engineering standards
Quick Selection Guide
Choose a floating ball valve if pressure, size and load are within design limits and you want a simple structure.
Choose a trunnion ball valve if the system has high pressure and needs higher torque capacity.
Final selection usually follows the engineer’s recommendation, because working conditions vary greatly.
Summary
The biggest difference between floating ball valves and trunnion ball valves is the ball support method. The ball in a floating ball valve has limited movement. The ball in a trunnion ball valve is held by a shaft and trunnion assembly. Keep this in mind for valve selection.


